Ada Conformity Assessment Authority |
Home |
Conformity Assessment | Test Suite |
ARG | Ada Standard |

An
integer_type_definition
defines an integer type; it defines either a *signed* integer type,
or a *modular* integer type. The base range of a signed integer
type includes at least the values of the specified range. A modular type
is an integer type with all arithmetic modulo a specified positive *modulus*;
such a type corresponds to an unsigned type with wrap-around semantics.

Each simple_expression
in a signed_integer_type_definition
is expected to be of any integer type; they need not be of the same type.
The expression
in a modular_type_definition
is likewise expected to be of any integer type.

The simple_expressions
of a signed_integer_type_definition
shall be static, and their values shall be in the range System.Min_Int
.. System.Max_Int.

The
expression
of a modular_type_definition
shall be static, and its value (the *modulus*) shall be positive,
and shall be no greater than System.Max_Binary_Modulus if a power of
2, or no greater than System.Max_Nonbinary_Modulus if not.

The set of values for a signed integer type is the
(infinite) set of mathematical integers, though only values of the base
range of the type are fully supported for run-time operations. The set
of values for a modular integer type are the values from 0 to one less
than the modulus, inclusive.

A signed_integer_type_definition
defines an integer type whose base range includes at least the values
of the simple_expressions
and is symmetric about zero, excepting possibly an extra negative value.
A signed_integer_type_definition
also defines a constrained first subtype of the type, with a range whose
bounds are given by the values of the simple_expressions,
converted to the type being defined.

A modular_type_definition
defines a modular type whose base range is from zero to one less than
the given modulus. A modular_type_definition
also defines a constrained first subtype of the type with a range that
is the same as the base range of the type.

There is a predefined signed
integer subtype named Integer, declared in the visible part of package
Standard. It is constrained to the base range of its type.

A
type defined by an integer_type_definition
is implicitly derived from *root_integer*, an anonymous predefined
(specific) integer type, whose base range is System.Min_Int .. System.Max_Int.
However, the base range of the new type is not inherited from *root_integer*,
but is instead determined by the range or modulus specified by the integer_type_definition.
Integer literals are all of the
type *universal_integer*, the universal type (see 3.4.1)
for the class rooted at *root_integer*, allowing their use with
the operations of any integer type.

For every modular
subtype S, the following attributes are defined:

S'Mod

This function returns *Arg* **mod**
S'Modulus, as a value of the type of S.

S'Modulus

The elaboration of an integer_type_definition
creates the integer type and its first subtype.

For a modular type, if the result of the execution
of a predefined operator (see 4.5) is outside
the base range of the type, the result is reduced modulo the modulus
of the type to a value that is within the base range of the type.

For
a signed integer type, the exception Constraint_Error is raised by the
execution of an operation that cannot deliver the correct result because
it is outside the base range of the type. For
any integer type, Constraint_Error is raised by the operators "/",
"**rem**", and "**mod**" if the right operand
is zero.

If Long_Integer is predefined
for an implementation, then its range shall include the range –2**31+1
.. +2**31–1.

System.Max_Binary_Modulus shall be at least 2**16.

For the execution of a predefined operation of a
signed integer type, the implementation need not raise Constraint_Error
if the result is outside the base range of the type, so long as the correct
result is produced.

An implementation
may provide additional predefined signed integer types, declared in the
visible part of Standard, whose first subtypes have names of the form
Short_Integer, Long_Integer, Short_Short_Integer, Long_Long_Integer,
etc. Different predefined integer types are allowed to have the same
base range. However, the range of Integer should be no wider than that
of Long_Integer. Similarly, the range of Short_Integer (if provided)
should be no wider than Integer. Corresponding recommendations apply
to any other predefined integer types. There need not be a named integer
type corresponding to each distinct base range supported by an implementation.
The range of each first subtype should be the base range of its type.

An implementation may provide
*nonstandard integer types*, descendants of *root_integer*
that are declared outside of the specification of package Standard, which
need not have all the standard characteristics of a type defined by an
integer_type_definition.
For example, a nonstandard integer type might have an asymmetric base
range or it might not be allowed as an array or loop index (a very long
integer). Any type descended from a nonstandard integer type is also
nonstandard. An implementation may place arbitrary restrictions on the
use of such types; it is implementation defined whether operators that
are predefined for “any integer type” are defined for a particular
nonstandard integer type. In any case, such types are not permitted as
explicit_generic_actual_parameters
for formal scalar types — see 12.5.2.

For a one's complement machine,
the high bound of the base range of a modular type whose modulus is one
less than a power of 2 may be equal to the modulus, rather than one less
than the modulus. It is implementation defined for which powers of 2,
if any, this permission is exercised.

For a one's complement machine, implementations
may support nonbinary modulus values greater than System.Max_Nonbinary_Modulus.
It is implementation defined which specific values greater than System.Max_Nonbinary_Modulus,
if any, are supported.

An implementation should support
Long_Integer in addition to Integer if the target machine supports 32-bit
(or longer) arithmetic. No other named integer subtypes are recommended
for package Standard. Instead, appropriate named integer subtypes should
be provided in the library package Interfaces (see B.2).

An implementation for a two's
complement machine should support modular types with a binary modulus
up to System.Max_Int*2+2. An implementation should support a nonbinary
modulus up to Integer'Last.

NOTES

33 Integer
literals are of the anonymous predefined integer type *universal_integer*.
Other integer types have no literals. However, the overload resolution
rules (see 8.6, “The
Context of Overload Resolution”) allow expressions of the type
*universal_integer* whenever an integer type is expected.

34 The same arithmetic operators are predefined
for all signed integer types defined by a signed_integer_type_definition
(see 4.5, “Operators
and Expression Evaluation”). For modular types, these same
operators are predefined, plus bit-wise logical operators (**and**,
**or**, **xor**, and **not**). In addition, for the unsigned
types declared in the language-defined package Interfaces (see B.2),
functions are defined that provide bit-wise shifting and rotating.

35 Modular types match a generic_formal_parameter_declaration
of the form "**type** T **is mod** <>;"; signed
integer types match "**type** T **is range** <>;"
(see 12.5.2).

Ada 2005 and 2012 Editions sponsored in part by **Ada-Europe**